Jan
12
Mark (TheCraftsmansPath.com) on January 12th, 2010
The moment of truth finally arrived and it was time to glue up some of the parts of the chair that have been worked on for some time now. I can tell you that with so much time put into creating these parts and knowing how fast a botched glue-up can occur, it was with [...]
Continue reading about Sculpted Rocking Chair: Front Leg Transitions and Gluing the Legs
With the legs for the table complete, I set my aim toward making the top. I did not have any stock wide enough to accommodate the top in a single piece so, I needed to glue two boards together.
In this case I used two rough boards about 6 inches wide to create the top. I [...]
