Dreadnought Guitar: Installing the binding and purfling

After I had routed the channels for the binding and purfling, the next step was to mortise the location for the end trim at the tail stock of the guitar. Because this end trim piece fits in between the bindings that go around the perimeter of the top and back it must be installed first.
I [...]

Continue reading about Dreadnought Guitar: Installing the binding and purfling

After getting the body together, the next step in the process was to trim the overhanging material from the back and top to be flush with the top and then to rout the channels for the binding and purfling. The binding will be placed along the seams of both the back and top where [...]

Continue reading about Dreadnought Guitar: Routing channels for binding and purfling